Ghost II Immobiliser
Protect your vehicle against key-cloning, hacking, and theft. It's silent and inaccessible by a potential car thief, as it does not utilize LED indicators or key fobs to alert them to its presence.
Transport Mode can be temporarily disabled for situations such as vehicle transport or when your car is being serviced.
Simple Change of PIN Code
Ghost is a groundbreaking next-generation security device that will secure your vehicle without cutting wires or adding aftermarket alarm key fobs for immobilisers or alarms. It connects directly to the vehicle's CAN Data Network and a personal PIN Code can be programmed into it by using the factory buttons on the steering wheel and dash. This code will block engine start and is indetectable to any scan or code grabbing technologies used by modern thieves.
The system also comes with an emergency Pin Code override in case the user forgets their pin code, or a programming button ceases to function. It also has a service/valet mode that allows the vehicle to be started temporarily and drove without requiring an authorization code. This makes it ideal for servicing or transport.
The UK automotive aftermarket, though thriving, is not immune to theft. Thieves are able to bypass the most common deterrents, such as locking your wheels and steering wheel by hacking into the OBD port of your vehicle. This can be done with a laptop, a USB cable, and a low-cost OBD scanner available online for under PS50.
It is important to protect your vehicle with an immobiliser for Ghost II to prevent theft. It's a discrete device that helps protect your vehicle from theft and is simple to use once you've got your PIN number. The device is inside a small box which can be connected to the wiring harness of your vehicle. It can be installed anywhere on your vehicle and is weatherproof. This makes it difficult for thieves to find. In addition, the device is easy to install and comes with a warranty.
Weatherproof tiny device
The device connects into the CAN data network of your vehicle without cutting wires, and operates silently. It can be programmed with an individual PIN code by using the buttons on the steering wheel as well as the dashboard to avoid theft. The device is equipped with a GPS tracker integrated into. It is activated by an app on your smartphone and is recommended by a variety of car insurance companies. It is weatherproof and can be hidden in the car and is nearly impossible for thieves to track it down.
Ghost II is completely silent, unlike traditional systems that are audible to criminals. It requires 4 to 21 button presses on the vehicle's buttons. The vehicle owner can alter the sequence according to their preference and it cannot be cracked. There is a mobile app that can be used to deactivate the system. If you are selling your vehicle, there's also a master reset code that can reset the immobiliser's CAN bus.
Modern thieves can utilize diagnostics to spot circuit breakages on modern vehicles. The Ghost however, does not have any. Our team of CANbus fitters can install this system in the vehicle with confidence.
Contrary to other CANbus immobilisers, which may require the use of key fobs and a key fob, the Ghost is compatible with all kinds of vehicles. Its technology is so advanced that it can guard against various security threats including signal relay attacks and ECU switching. It is compatible with many smartphones and can send alerts to owners if their vehicle is driving without authorization.
Tested for each vehicle
Ghost is a revolutionary immobiliser system that shields your vehicle from key cloning, hacking, and even key theft like nothing else on the market today. To steal a Ghost-protected vehicle, the criminal must physically remove the device and take it to an unattended trailer. It also protects against the use of lock on wheels as well as jumper cables and universal keys.
This simple to install system works silently and connects to the car's CAN data circuit enabling it to communicate directly with the ECU (Engine Control Unit). It is completely sealed and small that it can be wrapped inside your vehicle harness and put in any place, making it near impossible for thieves to recognize.
Once installed, it prevents your vehicle from starting until the disarming sequence is activated by pressing the buttons on the steering wheel, door panels or centre console. You can set it up to 20 digits and decide on how secure you'd like to be. It can also be used to activate a Service/Valet mode that allows you to temporarily start and drive your vehicle without entering your PIN.
Since it is based on the CAN data circuit there are no radio frequency signals, like the traditional immobiliser relay, this means a thief can't listen to the relay to try to figure out what PIN code is being entered. It is not equipped with circuit breakers and is not able to be detected by scanners, diagnostic tools, or code-grabbing technologies.
Boundary Car Care is proud to be an authorized installer of this fantastic product. We are extremely satisfied with its performance and the peace-of-mind it offers our customers. It's a fantastic solution to safeguard your pride and joy during these troubled times.
Emergency Pin Code Override
The Ghost immobiliser blocks your vehicle from starting without the correct PIN code. It is weatherproof and tamper proof. It is discreetly hidden in the wiring harness of your vehicle. Ghost 2 immobiliser uses buttons on the steering wheel or dashboard to create an individual code sequence. It is not a Thatcham device, since it does not have LED indicators and is connected to your vehicle through the CAN system. This makes it untraceable by professional thieves who are able to detect alarm/immobiliser systems in modern vehicles by using readily available diagnostic tools.
Inputting an emergency override on the app on your smartphone will temporarily disable your Ghost immobiliser. This allows you to loan your vehicle to family members, friends or valet, without sharing your pin. ghost ii immobiliser is ideal for situations like servicing or when you have to leave your vehicle at a valet or garage.
Ghost can be used with the driver fob. This allows you to start your car using your key or through the app. This is a great option for those with an infant who would like to drive the vehicle or you are unable to enter your pin code quickly or would like to use the vehicle in case of emergency, such as a breakdown.
With a simple PIN change procedure, an easy-to-use interface, and numerous security features, it's no wonder why the Ghost immobiliser is endorsed by a variety of insurance companies and secured by a warranty. Its sleek, compact design and seamless integration into your vehicle's current systems makes it an ideal option for vintage or high-performance automobiles.
Service/Valet Mode
The Ghost is an immobiliser that can prevent vehicle theft by blocking communication between your key and the ECU which means that the engine can't be started without entering a unique PIN. It's also hidden within the wiring, allowing it to be hidden from view and does not use LED indicators that could signal its presence. This is ideal if you have to give your vehicle to valet parking or a mechanic. To activate valet mode, enter the code provided to you by your engineer at the completion of installation - this will allow the car to start without having to go through the sequence to disarm. To leave valet mode, simply switch your car back to normal operation and the code will change back to your normal pin.
Ghost is designed to integrate with the CAN bus system in your car, unlike other aftermarket security products that depend on key-fobs or buttons. This gives it unrivalled protection against the latest theft techniques such as key cloning and hacking.
Once installed your engineer will instruct you on how to arm or disarm your vehicle. All of this is done using your smartphone application. Your engineer will set your pin, which is easy to remember and mathematically impossible for thieves to guess, however if you do forget it don't fret because every installation includes an Emergency PIN Code override that allows you to get your vehicle back in action.
Our installers are certified and have been trained to ensure that your Ghost is installed correctly. All installations are carried out at the premises of our customers and we offer a demonstration on how to operate the device and mobile app. Once your Ghost has been installed, we assure its performance for the duration of time.